Gtco Summagrid IV - Users Guide Part 2 Manual do Utilizador descarregar pdf (Página 3)

Summagrid IV 3

1.2.2 Command Syntax

Change Emulation

Microgrid UIOF

MM/SummaSketch

CalComp

GTCO

<ESC>z(n)

n=0

n=1

n=2

n=3

1.3 Communication Protocol Commands

1.3.1 Description

These commands are used to change the Summagrid IV communication protocols

from the host.

1.3.2 When to Use

The user needs to change the communication protocols when working with multiple

applications that require different information, such as baud rate, parity and

number of data bits.

1.3.3 Baud Rate

Baud rate refers to the number of bits transmitted each second between the host

and Summagrid IV, or between the Summagrid IV and the host. The available

Summagrid IV baud rates, along with their corresponding ASCII commands and DIP

switch settings, are listed in the table below.

1 2 3 4 5 6 7 8 ... 27 28

Sem comentários

Gtco Summagrid IV - Users Guide Part 2 Manual do Utilizador Página 3