
Cordless Roll-Up 33
9. If GTCOTEST indicates that the digitizer is functioning properly, check your software
application setup and SuperSet code for accuracy. If you have any questions about
your results or need assistance running GTCOTEST, contact our Technical Support
Department.
Cordless Roll-Up Technical Specifications
Active Area
30” x 36”
36” x 48”
Footprint
35” x 44”
41” x 56”
Avg. Ship Wt.
17 lbs.
21 lbs.
Up to 2000 lpi (lines/inch) or 100 lpmm (lines/millimeter)
Selectable (Factory default: lower left corner)
Recommended Roll Diameter
41° to 115° F (5° to 46° C)
-4° to 158° F (-20° to 70° C)
0% to 100%, non-condensing
Point, Line, Continuous, Line Incremental, Continuous
Incremental, Remote Request
1200, 2400, 4800, 9600, 19200 and 38400
Rated life over 1 million actuations
Approximately 350 hours of continuous use
3.5V 750mAH lithium (Eagle-Picher LTC-7PN-S4 or
equivalent)
GTCO T5A, CalComp 9100/9500, Summagraphics
Microgrid and ID Series
Output voltage +9VDC at 500mA, Center positive
9- to 25-pin (See Figure 5)
Comentários a estes Manuais